Alcatel-carrier-internetworking-solutions Omni Switch/Router Manual de usuario descargar pdf (Pagina 64)

MPX Serial and Ethernet Management Ports

Page 2-4

MPX Serial and Ethernet Management Ports

You can gain access to switch management software through one of the two serial (RS-232)

ports on the MPX or the Ethernet management port. The two serial ports are configured with

9-pin “D” connectors (DB-9) per the IBM AT serial port specification. One port, called the

“modem” port, is male and the other, called the “console” port, is female. See MPX Manage-

ment Connectors on page 2-3 for illustrations of these ports.

The modem port is a Data Terminal Equipment (

DTE) connector, which is typically connected

to a modem. You can also connect directly from this port to a PC or terminal with a standard

null-modem cable available in most computer equipment stores.

♦ Note ♦

The modem port is hard-wired for

DTE communica-

tion; you do not need to set any jumpers.

The console port is a Data Communication Equipment (

DCE) connector, which can be directly

connected to a PC, terminal, or printer.

MPX Console Port

MPX Console Port Speciﬁcations

Pin Number Standard Signal

Name

Direction

1 Not Used

2 RD From MPX

3 TD To MPX

4, Not Used

5 GND

6 Not Used

7 Not Used

8 Not Used

9 Not Used

Shell Shield GND

1 5

6 9

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 109 110

Sin comentarios

Alcatel-carrier-internetworking-solutions Omni Switch/Router Manual de usuario Pagina 64